The cooler is very similar to the CNPS7000 series but with one major
difference. The CNPS7700 series uses a 120mm fan compared to the 92mm fan used
with the CNPS7000 series. The 120mm Fan provides a greater amount of airflow at
slower fan RPM, which gives greater cooling performance without any extra
noise!
- Intel Pentium4 Socket 775/478
- AMD Sempron/AMD64 Socket 754/939/940
Features :
1. Does not generate noise or vibration in Silent Mode.
2. Pure Copper base material ensures excellent heat dissipation.
3. Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), and AMD64 (Socket
754/939/940)
compatible design for broad compatibility.
4. The large 120mm fan inside the FHS maximizes cooling performance by providing
sufficient
airflow even at slow rotation speeds.
5. The large 120mm fan provides air flow over a large area, cooling not only the
CPU, but the
VGA card, Northbridge, FET, and RAM.
6. The adjustable fan speed controller (FAN MATE 2) enables control of noise and
fan performance
|
Compatible CPUs and Motherboards |
|
| |
Socket |
CPU |
Silent Mode
(1,000~1,400rpm) |
Low-noise Mode
(1,400~2,000rpm) |
|
INTEL |
775 |
Pentium 4 |
Prescott |
All Speeds |
All Speeds |
| 478 |
Celeron |
| Pentium 4 |
Willamette |
| Northwood |
| Prescott |
|
AMD |
754 |
Sempron |
All Speeds |
All Speeds |
| Athlon 64 |
| 939 |
Athlon 64 |
| Athlon 64 FX |
| 940 |
Athlon 64 FX |
| Opteron |
|
| |
* Note : No motherboard
components with a height greater than 39mm (1.53inch), as well as the
PSU, disk drives, VGA card, and RAM should be present within a
68mm (2.68 inch)
radius from the center of the CPU.
|
Specifications: |
|
 CNPS7700-Cu
|
| |
- Dimensions |
: 136(L) x 136(W) x 67(H)mm |
| |
- Weight |
: 918g |
| |
- Base Material |
: Pure Copper |
| |
- Dissipation Area
|
: 3,268 cm2 |
| |
- Bearing Type |
: 2-Ball |
| |
- Speed |
: 1,000 ~ 2,000rpm ± 10% |
| |
- Thermal
Resistance |
: 0.19 ~ 0.24°C/W |
| |
- Noise Level |
: 20 ~ 32dB ± 10% |
|
FAN
Speed Controller (FAN MATE 2)
|
| |
- Dimensions |
: 70(L) x 26(W) x 26(H)mm |
| |
- Weight |
: 20g |
| |
- Output Voltage |
: 5V ~ 11V ± 2% |
| |
- Allowable Power |
: 6W or lower |
| |
- Connector |
: 3-Pin |
| |
※
Directions for Use
 |
|
|
|
| |
Included Install components
1) Heatsink Assembly (CNPS7700-Cu)
2) Four Grips (2 each for S-Type and L-Type)
3) Four Bolts
4) Thermal Grease
5) Fan Speed Controller (FAN MATE 2)
6) Double-sided Tape (for installing FAN MATE 2)
7) Cable for FAN MATE 2
8) User's Manual - in English and Korean
Components for Intel Pentium 4 (Socket 775)
9) One Clip Support for Socket 775
10) One Backplate for Socket 775
11) Four Clip Support Fixing Bolts
Components for Intel Pentium 4 (Socket 478)
12) Two Clip Supports for Socket 478
Components for AMD Sempron/AMD64 (Socket 754/939/940)
13) Two Nipples
14) One Backplate for AMD64
15) One set of Washers
User Guide
Refer to
Zalman Website for Additional Information and Compatibility
Why can't I add more than one item to my cart?
This problem occurs when you are using certain software firewalls, most often times ZoneAlarm, to get around this problem either temporarily disable your firewall or add an exception for our URL/shopping cart which are
https://us-dc1-order.store.yahoo.net/ and
http://order.store.yahoo.net/
Also make sure your browser has cookies enabled.
Unfortunately once an order has been placed we cannot add/remove products or adjust the shipping, you will need to send us a cancellation notice and place a new order once you receive confirmation it has been cancelled.
Please check the status of your order before canceling, we cannot cancel an order once it has been sent to our warehouse or marked as shipped.
Yes you can, to do so please place your order online and under shipping method select "Will Call", as soon as the order is available for pickup we'll email you or if you'd like us to contact you via phone please let us know by leaving a comment on the checkout page.
Most orders placed before Noon will be available for pickup the same day however it is not guaranteed.
Important Note:Not all our items are warehoused locally and available for Will Call, if there are any items on your order not available we will contact you when your order is received..
Our Will Call hours are 9:30AM-12:00PM and 1:00PM-4:00PM Monday through Friday excluding holidays.
The way our system is setup we are unable to charge any order more than once, what you are seeing is the initial authorize of funds that is put on hold when you place an order. If for some reason you add/remove items, or adjust the order total in any way the charge will not match the authorize and when the order is shipped and charged it will not remove the authorize so it is possible to see the charge AND the authorize at the same time, however, you were only charged one time.
Most authorizes drop off in 24-72 hours, if for some reason it does not please call your bank or credit union to have it removed.
If the shipping cost on your order seems abnormally expensive please let us know and we'll take a look at the order and adjust it if there is indeed an error.
Orders with many small items can lead to inaccurate shipping charges.
