Thermaltake Aqua-Bay M5 #CL-W0103
Thermaltake AquaBay M5 CL-W0103
Alarm your L.C.S for liquid level and temp. with
pump
Compatible with Thermaltakefs L.C.S( Liquid Cooling System) and
components
Liquid temperature and level monitor in the 5.25" drive bay.
Easily monitor the liquid temperature and level from LCD panel in the
front.
Built-in liquid temperature and level alarm.
The signal will flashCerror beeps will occur and the LCD panel will change
colors from
blue to red when the coolant is below the "low" mark.
The LCD panel will change colors from blue to red if the temperature of the
system
is higher than the set alarm temperature.
Fast response probe:
Temperature probe can detect the water temperature in real-time.
Liquid level probe can detect the coolant level in real-time.
User Friendly:
The temperature probe can be put at anywhere within the LCS loop
Quick Install Connectors:
The temperature probe connector is suitable for tubing of ID
6.4mm(1/4h)/9.5mm(3/8h)
May not be compatible with coolant other than coolant provided by Thermaltake
| a. Functions of LCD panel | |
| Dimension of the mounting plate | 14.9(H) x 4.1(W) x 6.5cm(D) |
| Sampling rate | 1 sec |
| Water temp. range | 0‹C ~ 95‹C |
| Resolution | 0.1 ‹C |
| Accuracy | +/- 1 ‹C |
| Display | Constant/Real time |
| Temp alarm setting range | 25 ‹ C ~ 70‹C+/- 5 ‹ C |
| Temp. normal status | LCD with blue light |
| Temp. and liquid level alarm warning | LCD with red light The signal will flash and error beeps will occur when the coolant is below the "low" mark |
| b. P500 pump | - Rated voltage :DC
12V - Input current :600 mA - Bearing: Ceramic bearing - Flow rate:500L/h - Connector:3pinC4pin - LED :Blue - Noise:16dB - Life time:80,000 hours |
| c. Capacity of liquid tank | 350 cc |
| d. The temp. probe | Swiftly read the temperature of your system |
| e. Quick install connectors | - for ID 6.4 mm(1/4h) tubing - for ID 9.5 mm(3/8h) tubing |
| f. Weight | 930g |
YOU MAY ALSO LIKE...
 |
$39.95 |
|
$3.95 |
|
$5.95 |
|
$12.95 |
|
$34.95 |
