**END OF LIFE**
Coolerguys Single 120mm Fan Cooling Kit with Programmable Thermal Controller GT Series
840556002475
This particular *kit is for a single fan unit meant to cool your cabinet, multimedia center, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination!
This fan can move 46 cubic feet (WxHxD) of air per minute (CFM) which is good for 1-2 components (up to 10 cubic feet of space with 1 shelf), this is just a general rule of thumb and it assumes you have adequate space for air to flow in from, and ventilation between shelving, we're currently working on an in-depth guide to airflow and cooling however in the meantime if you have questions we're here to help you! contact us !Includes: Ultra Quiet & Reliable Nidec GentleTyphoon 120mm 1450RPM Dual Ball bearing Fan extensions here .Coolerguys Programmable Thermal Controller with LED Temperature Display This controller comes with a 32" long waterproof probe, place where you'd like to monitor the temperature, when the temperature reaches the temperature you have programmed as the "On" setting the fan and anything else plugged into the unit will be activated until the temperature falls below the programmed "Off" setting. It natively supports up to 4 3pin connections (12v only) but can handle more with the appropriate splitters (maximum 3A). Comes with our shelf mount bracket so you can mount the display if you'd like. Click here to see our probe replacements & extensions Temperatures above are (+/- 1° F) / Programmable range of 40F (4C) to 145F (63C) / LED display can be toggled on/off
If you'd like to add additional brackets and fans to this kit you can find them here , non-thermal controlled kits only have enough ports for the fans which come with it, the standard thermal controlled and programmable controllers have 4 native ports, if you need more ports for fans we have adapters here
Need an anti-static workplace? what about zip-ties, cable anchors or sleeving to help clean up your installation? Check out our recommended installation and finishing items here. Completed Fan and Bracket Dimensions when assembled using the included parts: Acrylic & Metal: 6.25" x 6.25" x 1.38" (158 x 158 x 35mm)Wood: 7.00" x 7.00" x 1.77" (178 x 178 x 45mm)Cutout size: Acrylic & Metal: 5.00" x 5.00" (130 x 130mm)Wood: 5.75" x 5.75" (145 x 145 mm)General Instructions for CabCool Cabinet Cooler Kits (574 kb pdf)Total Kit Contents: Ultra Quiet & Reliable GentleTyphoon 120mm 1450RPM Dual Ball bearing Fan Coolerguys Programmable Thermal Controller with LED Temperature Displa yController shelf mount bracket Black 120mm Honeycomb Mesh Fan Grill Black 120mm Fan Grill Fan nuts and bolts
PRODUCT SPECIFICATIONS: Fan Speed: 1450 RPMOperation Voltage: DC 12 VoltsInput current: 0.049 Amp DrawOperation temperature: -10 to +65 CStorage temperature: -40 to +70 CAirflow 45.9 CFM Noise Level: 21 dBA
***Wood Grill does not come with the honeycomb grill or the nuts and bolts, it uses its own screws to mount the fan to the bracket.
We also have kits with a standard pre-set thermal controller without a display as well as with no controller at all (always on, great to use with switched power outlets)
VIDEO We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.
