*Cabcool 1201-2 Two-Single 120mm Kits with Thermal Contro
Custom acrylic black fan bracket (2)
Custom laser cut acrylic grill with pre-cut holes for installing fans and grills. Easily attaches to the inside or outside of cabinet.
Includes Low Speed Quiet 120mm Fan (2)
The fan can be set to intake or exhaust, simply point the fan the desired direction before mounting to the grill.
thermal controller (2 included):
The fan(s) will only power when the temperature monitored by the included controller/probe (24” length) reaches 88°F (31C) and will stay on until the temperature drops below 81°F (27C) (+/- 1°)
Programmable Thermal Fan Controller with LED Display (optional. Additional
$30.00 for upgrade.
This is our latest thermal control unit. The Programmable Thermal Fan Controller gives you complete control to set the temperature for power-on and power-off.
The separate fan brackets can be place next to each other or across from each other for equal pressure setup. The black acrylic finish easily blends into many different style decors.
After cutting an
appropriate sized hole simply insert the completed cooler assembly and attach
using the included brass screws.
The included fan is powered by the included CG 100-240v AC to 4pin 12/5v power supply, plugs into a standard wall outlet (US 2 prong or UK 3 prong depending on your region)
Everything you need to assemble and mount the kit is included
Cooling Unit includes the following:
(1) CG 100-240v AC to 12/5v DC Power Supply with 4 Pin Molex Connector (840556029977)
(1) 4-Pin molex power splitter 12 inch Black Sealed – (840556087083)
(2) 4 pin molex 24 inch extensions _ (840556088639)
(2) Black Acrylic Fan bracket (6.25" x 6.25" x .125") -
(2) Coolerguys Pre-Set Thermal Controller (Rev. 4) (840556098690)
(2) Coolerguys 120mm Quiet Low Speed 120mm Fan (840556091929)
(2) Black 120mm Honeycomb Mesh Fan Grills
(2) 120mm Black Fan Grill (840556082705)
(8) Fan Nut and Bolt Sets
Pack - 4" Nylon Multi-Purpose Tie Black (840556050018)
(8) #6 - 1/2" black Cabinet screw
Dimensions (per bracket):
Face: 159 x 159 x 3mm
Cabinet Cut-out Size: 130 x 130mm
Fan Specifications (per fan):
RPM: 1200 +/- 10%
Bearings: Dual Ball 50,000 Life Hours
Take a look at our
video showing generic instruction on installation of our cooing kits
*This is a Kit and some assembly is required.
Programmable with/LED Display sku 840556090960