*Spire TME III Thermal Eclipse-V3 #SP984N1-V3-PWM
The TMEIII is the next evolution of the hugely successful TherMax Eclipse CPU
cooler series. The increased number of heat-pipes combined with a higher number
and density of dimpled fins and crowned with two (2) high airflow, Nano Bearing
DC fans for extreme cooling performance. Five (5) U-shaped 8mm all-copper
heat-pipes are in direct contact with the CPU heat-spreader (heat source), rapid
heat transfer to the 45 aluminum dimpled fins providing a larger surface area
for optimum heat dissipation. The TME III is supplied with two (2) 12cm
BlackStar 7 blades, high quality precision Nano - Bearing DC fans, providing
high airflow and sufficient cooling. These fans are PWM controlled to provide
the best sound / cooling ratio possible. Compatibility is guaranteed with
multi-platform mounting for all current Intel and AMD micro-processors. The TME
III brings cooling power to an all-new level. Another amazing product from Spire
– Powered by Innovation.
Main Features:
Five (5) 8mm all copper U-shaped sinter-powder heat-pipes
Solid copper base in direct contact with all of the processor area
Straight lined heat-pipes allowing air to easily pass through
Stamped aluminum wide fins for best surface rate
Dimpled surface fin for increased heat transfer rate
All black-Nickel coated heat-pipes to preserve killer looks from oxidation
Two (2pcs) 120mm BlackStar 7 blade DC fan included
High Quality, Long MTBF precision Nano - Bearing
Supports AM2/AM3 socket 939/940/ 775/1155/1156 & 1366
Best cooling performance on hot CPU’s up to TDP 150W
PWM fan speed control, 4 PIN PWM (2510) Mainboard Connector
Compatibility:
The TME III Cooler is compatible with the latest ATX boards based on the Intel
and AMD Micro-processors sockets 775/1155/1156/1366 for Intel and
AM2/AM3/940/939 for AMD (not G34 compatible).
Product Includes :
TME III Heat-sink, Two (2) 12cm BlackStar 7 blades DC Fans, 8 Anti-Vibe rubber
fan mounts, BlueFrost thermal interface compound, Intel universal mounting set,
AMD universal mounting set, Motherboard back-plate, User installation manual,
Warranty registration card.
Dimensions
Heat sink :131×70×152 mm (l × w × h)
12VDC Fan : 120×120×25 mm
Material Al+Cu
Heatpipe Five (5) 8mm all copper U-shaped direct
Bearing Nano Bearing
Rated speed
Cooler : 600~1800 rpm RPM +/-10%
Only Fan : 600~1800 rpm RPM +/-10%
Rated power 2.16 W
Rated Voltage 12 V
Noise level 10~22 dBA
Air flow 74.63 CFM Max.
Current 0.18 A
Connector 4 PIN PWM (2510)
Application
Intel Core i3
Intel Core i5
Intel Core i7 Cooler
Intel LGA775 (Prescott)
AMD Althlon X2 (AM2/AM2+)
AMD Athlon 64 FX-74 (K8)
AMD Phenom (AM2/AM2+)
AMD Phenom II (AM2/AM3)
AMD Sempron (K8)
TDP 150 W
Thermal resistance 0.091 oC/W
Thermal paste BlueFrost - SP802 blue grease(Injection Tube,0.5g)
Static Pressure 2.86 mmH2O
MTBF 70000H
Operating Temperature -10~70 oC
Storage Temperature -40~70 oC
Warranty by manufacture 5 years
Packaging type Color Box
Package includes
2x FANS / 1x clip mounting-set / SP-802 grease / Installation manual /
Warranty card
N.W 0.822 KG
G.W 1.3 KG
Features
Two (2) 120mm BlackStar 7 blade fan design High Quality,Long MTBF Nano
precision bearing Anti-Vibe universal rubber fan mountings (crews), Supports
AM2/AM3 socket 939/940/ 775/1156 & 1366 Intel Core i7 Extreme 150W
* All Spire CPU cooling products come with thermal compound either
pre-applied onto the cooler or in an injection tube. Compound will begin to
function at its optimum potential, after a gradual increase in heat-dissipation,
approximately 168 hours (7days) after initial application.
* All technical data shown above are measurements from our own laboratory.
Product images shown may differ from actual product. Specifications are subject
to change without prior notice.
UPC Code 6943051205762
*The Model Number was misprinted at factory on the initial shipment we
received. It was printed as SP984B1 instead of SP984N1. The correct
model # is SP984N1 and that is the only model we carry.
