Home > Cables > Cable Adapters & Extensions > Switch, Thermal & Variable Control Cables > Coolerguys Pre-Set Thermal Controller (Rev4)

Coolerguys Pre-Set Thermal Controller (Rev4)

Coolerguys
Switch, Thermal & Variable Control Cables
Coolerguys Pre-Set Thermal Controller (Rev4)

Coolerguys Pre-Set Thermal Controller (Rev4)
Temperature controlled on/off switch sku 840556098690

Designed to work with our 100-240v 12/5v External Power Supply (shown here, not included) or any standard computer supply to power 12v devices.
This controller has 2 functions.
1. Continuously power up to 2000ma (2A) worth of devices when the switch is in the up position (top green led will be lit)
2. Thermally control up to 2000ma (2A) worth of devices when the back switch is in the bottom position, when the temperature is >=88F(31C) it will power on the 3pin ports and stay powered on until the temperature falls below 81F(27C)
3. Switch in up position turns fan always On

This Thermal switch is the work horse of our Cabinet Cooler Kits.  We use this and our LED Version of the same controller for most of the temperature control needs.  This switch fits into a precut slot in a number of the kits or in  and can also be used as a stand-alone unit using one of our Mounting Brackets (not included).

If you are using this outside of a computer you must use a power supply that has both 12v and 5v power in order for it to function properly.

Package Includes
(1) Controller Device: 75mm x 44mm x 25mm / Cutout: 68mm x 38mm
(1) Thermal Probe 18" (please leave the protective shield on)

Specifications:
(1) 4pin female molex port, 12v, ground, ground, 5v to power the device
(4) 3pin male connectors, 12v & ground out only, 3rd pin inactive
(1) 3mm Green LED, only lights when you are using in continuous mode with switch in up position
(1) 3mm Dual Red/Green LED, when switch is in down thermal control position this will be red when below 81F and Green when the controller has activated the 3pin devices
*Controller draws 100ma
*Maximum power draw to not exceed 1800ma (1.8A) or it can damage the device

Accessories :
Probe Extensions
Mounting Bracket
4pin to 3pin power adapter, useful to power 4pin molex devices from this controller
3pin extension cables (most fans/devices have 12" in length, needed if you are from the controller)

Important Note: DO NOT REMOVE PROTECTIVE SHIELD from the  thermal probe to prevent static charge from damaging the sensor.

 

http://www.coolerguys.com/840556098690.html
$19.95
Coolerguys Pre-Set Thermal Controller (Rev4)
Item #:840556098690
Price:$19.95
Quantity:
Zip Code: Province:
Country:
Calculate Shipping Rates Here!

Product Description

Coolerguys Pre-Set Thermal Controller (Rev4)
Temperature controlled on/off switch sku 840556098690

Designed to work with our 100-240v 12/5v External Power Supply (shown here, not included) or any standard computer supply to power 12v devices.
This controller has 2 functions.
1. Continuously power up to 2000ma (2A) worth of devices when the switch is in the up position (top green led will be lit)
2. Thermally control up to 2000ma (2A) worth of devices when the back switch is in the bottom position, when the temperature is >=88F(31C) it will power on the 3pin ports and stay powered on until the temperature falls below 81F(27C)
3. Switch in up position turns fan always On

This Thermal switch is the work horse of our Cabinet Cooler Kits.  We use this and our LED Version of the same controller for most of the temperature control needs.  This switch fits into a precut slot in a number of the kits or in  and can also be used as a stand-alone unit using one of our Mounting Brackets (not included).

If you are using this outside of a computer you must use a power supply that has both 12v and 5v power in order for it to function properly.

Package Includes
(1) Controller Device: 75mm x 44mm x 25mm / Cutout: 68mm x 38mm
(1) Thermal Probe 18" (please leave the protective shield on)

Specifications:
(1) 4pin female molex port, 12v, ground, ground, 5v to power the device
(4) 3pin male connectors, 12v & ground out only, 3rd pin inactive
(1) 3mm Green LED, only lights when you are using in continuous mode with switch in up position
(1) 3mm Dual Red/Green LED, when switch is in down thermal control position this will be red when below 81F and Green when the controller has activated the 3pin devices
*Controller draws 100ma
*Maximum power draw to not exceed 1800ma (1.8A) or it can damage the device

Accessories :
Probe Extensions
Mounting Bracket
4pin to 3pin power adapter, useful to power 4pin molex devices from this controller
3pin extension cables (most fans/devices have 12" in length, needed if you are from the controller)

Important Note: DO NOT REMOVE PROTECTIVE SHIELD from the  thermal probe to prevent static charge from damaging the sensor.



 
we accept american express, mastercard, visa, paypal International Shipping - BongoUS E-commerce by Yahoo! This shopping cart employs the highest industry strength security: 256 bit SSL Mechant Ratings
2013 COOLPC, INC All Rights Reserved. Yahoo! Store by Solid Cactus