Cabcool 1201-2 Two-Single 120mm Kits with Thermal Control
Preset Non-Adjustable 81-86: 840556090113
Programmable with/LED Display: 840556090960
Custom Acrylic Black Fan Bracket (2)
Custom laser cut acrylic grill with pre-cut holes for installing fans and grills.
Easily attaches to the inside or outside of the cabinet
Includes Low-Speed Quiet 120mm Fan (2)
The fan can be set to intake or exhaust, simply point the fan the desired direction before mounting to the grill.
Pre-Set thermal controller (2 included):
The fan(s) will only power when the temperature monitored by the included controller/probe (24 lengths) reaches 88°F (31C) and will stay on until the temperature drops below 81°F (27C) (+/- 1°)
Programmable Thermal Fan Controller with LED Display (optional)
Additional $30.00 for upgrade
This is our latest thermal control unit.
The Programmable Thermal Fan Controller gives you complete control to set the temperature for power-on and power-off.
The separate fan brackets can be placed next to each other or across from each other for equal pressure setup.
The black acrylic finish easily blends into many different style decors.
After cutting an appropriately sized hole simply insert the completed cooler assembly and attach using the included brass screws.
The included fan is powered by the included CG 100-240v AC to 4pin 12/5v power supply, plugs into a standard wall outlet (US 2 prong or UK 3 prong depending on your region)
Everything you need to assemble and mount the kit is included
Cooling Unit includes the following:
(1) CG 100-240v AC to 12/5v DC Power Supply with 4 Pin Molex Connector (840556029977)
(1) 4-Pin Molex power splitter 12 inch Black Sealed (840556087083)
(2) 4 pin Molex 24 inch extensions _ (840556088639)
(2) Black Acrylic Fan bracket (6.25" x 6.25" x .125") -
(2) Coolerguys Pre-Set Thermal Controller (Rev. 4) (840556098690)
(2) Coolerguys 120mm Quiet Low-Speed 120mm Fan (840556091929)
(2) Black 120mm Honeycomb Mesh Fan Grills
(2) 120mm Black Fan Grill (840556082705)
(8) Fan Nut and Bolt Sets
Pack: 4" Nylon Multi-Purpose Tie Black (840556050018)
(8) #6 - 1/2" black Cabinet screw
Face: 159 x 159 x 3mm
Cabinet Cut-out Size: 130 x 130mm
RPM: 1200 +/- 10%
Noise Level: 20.4 dBA
Bearings: Dual Ball 50,000 Life Hours
General Instruction pdf
*This is a Kit and some assembly is required
Take a look at our video showing generic instruction on installation of our cooing kits
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.