Lian Li Lancool K12 Midi-Tower Chassis
LanCool insisted on providing highest quality products, and all the products are made in Taiwan , with high standard workmanship and best material.
- Modular patented anti-vibration HDD cage (3xHDDs)
- 9x 5.25 ODD bays
- PSU mounted high (back), supports large PSUs
- 120mm intake (front-adjustable);
- 120mm exhaust (back-high)
- Door panel with lock and silent padding
- Aluminum shell, with steel core
For external finishing, LanCool used the high quality Taiwan made aluminum alloy panel on Metal Boned K12. With hair-line brush and anodized treatment on the surface, to make the external in metallic finishing. Most the sharp edges has been removed, or cover up with protection for maximum safety.
Metal Boned K12 designed for power users, from external design to internal features. The user interface, hardware structure, and finishing, all require to pass a lot of test to ensure highest product quality.
Metal Boned K12 has an aluminum door panel, which formed with high quality aluminum alloy panel in hair-line brushed finishing with 3D steel mesh for maximum air input.
LAN party user need solid chassis which can maintains in good shape to house their hardware during travel. The housing is 0.8mm thick SECC, strength 40% tougher, external in aluminum, easy to cut and modify.
Metal Boned K series has metal structure, for tougher housing, allow carry heavy hardware, built for LAN Party Gamers.
There are 9 x 5.25 rack space in the front of K12, with a Lian Li patented anti-vibration HDD cage, allow user to set the position of the cage to suit their need.
The 120mm fans on Metal Boned K9, features high airflow in low RPM, these fans can cool the system down, with lower noise level. All the fans are 1000RPM
There are anti-vibration spring on the chassis, to reduce the noise which cause by the vibration.
The Lian Li patented anti-vibration HDD cage is easy to use and works, to mount the rubber ring with special thumb screws to the HDD, and it will reduce the noise which cause by the vibration.
There is a 120mm intake fans @ 1000RPM in the front of the HDD cage, input cold air into the case. User can adjust the position of the HDD cage to feed the cool air to certain point.
The rear 120mm exhaust fan at the rear, at 1000RPM, to remove the hot system air out, to keep the system cool.
For more cooling performance, K12 supports liquid cooling system, there are two opening at the rear allow water tubes to pass through.
There are vents on the PCI bracket, allow the better airflow, there are vent holes next to the PCI slots are for optional PCI / Graphics Card Cooler.
|Model ||PC-K12 |
|Case Type ||Hybrid Mid Tower |
|Dimensions ||210 x 450 x526mm(W x H x D) |
|Front bezel Material ||Aluminum |
|Color ||Black |
|Side Panel ||Plain |
|Body Material ||SECC |
|Net Weight ||NA |
|5.25" drive bay (External) ||9 |
|3.5" drive bay (External) || |
|3.5" drive bay (Internal) ||3(use 5.25' bayx3) |
|Expansion Slot ||7 |
|Motherboard ||ATX / Micro ATX |
|System Fan (Front) ||120mm Silent fan x1 (@1000RPM) |
|System Fan (Top) ||NA |
|System Fan (Rear) ||120mm Silent fan x1 (@1000RPM) |
|I/O Ports ||USB2.0 x4 / IEEE1394 x1 /E-SATA x1/ HD+AC97 Audio |