CG Comcool Cooling Stand Kit with Thermal Controlled 120mm Fans
Large 120-2L-K 840556093909 / Medium 120-2M-K 840556093893
This all metal dual 120mm cooling kit is the perfect fit to lay between, on top of, or below any media component that generates heat.
The Comcool Dual 120mm Stand is all metal and black powder coated to match virtually any black component in your setup. With it's (2) 120mm fans it pushes up to 92 CFM which is enough to silently cool even the largest receivers. Includes our Coolerguys Thermal Fan Controller with pre-set temperature controlled on/off switch.
Comcool Dual 120mm all metal stand
(2) 120mm Black Fan Grill / Guard
(1) 110v AC to 12v DC Power Supply with 4 Pin Molex (1000mA)
(2) Coolerguys Ultra Quiet 120mm dual ball bearing fan 3 pin fan #CG12025L12B2-3Y
(1) Coolerguys Pre-Set Thermal Controller (Rev4)
(4) Rubber case foot bumpers
(1) Nylon multi-purpose ties/ Black 4"
(2) Nut and Bolt Black 40mm set of (4)
six inch strip of protective molding (see picture instructions)
Stand, fans, screws, grills, thermal controller and power supply adapter.
This complete kit has two size options to match most any component you may have:
Model no: Comcool 120-2M
Dimensions: 355 (~14") x 265 (~10.5") x 31mm (~1.5") (W,D,H)
Model no: Comcool 120-2L
Dimensions: 405 (~16") x 305 (~12.5") x 31mm (~1.5") (W,D,H)
Rated Voltage: 12 Volts
Operation Voltage: 6.5~13.8 Volts
Input current: 0.30 Amp Max
Operation Temperature: -10 to +65 C
Storage Temperature: -40 to +70 C
Bearing: Dual Ball Bearing
Fan Speed: 1200 +/- 10% with adapter
Airflow: 46 CFM
Noise Level: 20.4 dBA
Coolerguys Thermal Fan Controller:
Thermal sensor will turn the connected fans on at ~87°F (30°C) and leave them running until the temperature drops below ~80°F (27°C)
External probe (450mm / 18 inch in length) so that you can monitor the temperature away from the controller
Female 4 pin Molex on one side and (2) 3 pin male on the other.
Green LED power light (always on)
Size: 82 x 35 x 17mm / 3.22 x 1.37 x 0.66in
With this kit you can reliably cool your components for years without adding a lot of noise to your setup.
This is a Kit and some assembly is required.
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.