ComCool Stand with Dual 120mm Rear Blower fans and LED controller / 12V
This all metal (4) Fan 120mm cooling kit creates a wave of air to gently cool tough heat problem areas. Designed to pull air up and away for hot areas and gently blow hot air through the rear of the stand. It is the perfect fit to lie between, on top of, or below any media component that generates excessive heat.
The Comcool Fan Stand is all metal and black powder coated to match virtually any black component in your setup. With its (2) 120mm blower fans it pushes up to 44 CFM which is enough to cool even the most receivers. Even with all that air the noise is limited to 22.4 dB at full speed.
Stand Dimensions: 407 (~16") x 305 (~12 ") x 45mm (~1.75") (W,D,H)
12V powered kit includes:
(1) Comcool all metal stand / Black
(2) Quiet 120mm Blower 12v Fan 840556094272
(1) 12v Power Supply with 4 Pin Molex 2A 840556029977
(2) Nylon multi-purpose ties/ Black 4" with anchors 840556021568
(1) Programmable Thermal Fan Controller with LED Display 840556090885
six inch strip of protective molding (see picture instructions)
Dimension: 120x120x25 mm
Bearing: Dual Ball
Rated Current: 0.18A
Lock rotor current: 0.16A
Rated Power: 2.16W
Rated Speed: 1200 RPM±10%
Air Flow: 22 CFM
Static Air Pressure: 5.6 mmAq(InchH20)
Noise Level: 22 dB(A)
Life Expectancy: 50,000 Hours @ 25C
- Install fans to metal stand using enclosed screws.
- Attach with logo side facing the top of stand and exhaust side of Fan against rectangular holes on the back of the stand.
- Remove adhesive from anchor and affix to center of the stand.
- Use zip ties for wire clean-up and control.
- Snap Thermal LED Display into front cut-out section.
For 12V fans:
Plug fans into 3pin plugs on the back of Thermal LED Display.
Plug end power supply 4pin Molex into Thermal LED Display.
With this kit, you can reliably cool your components for years without adding a lot of noise to your setup.
This is a Kit and some assembly is required.
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.