Coolerguys Power Supply (2A) Converter 120V to 12V & Pre-set Thermal Controller
This combo purchase is a great addition for our most of our Coolerguys Cabinet cooling kits. It includes Our 1A 4 pin molex 12V power supply and our pre-set thermal controller. The Power supply with quietly power our 12V fans and the thermal sensor will turn the connected fans on at ~88°F (31°C) and leave them running until the temperature drops below ~81°F (27°C).
Great Adapter to Power your Entertainment Cooling Center
Standard 4 Pin Molex Connector
Expandable - Can power up to 5 + Fans - (up to 1A)
Take advantage of Quiet 12V Computer Fans
4pin Molex Adapter with 60" Power Lead
Input: 100-240VAC 50/60Hz 1.5A
Output: 12V +- 1A
(1) 4pin female mMolexport, 12v, ground, ground, 5v to power the device
(4) 3pin male connectors, 12v & ground out only, 3rd pin inactive
(1) 3mm Green LED, only lights when you are using in continuous mode with the switch in the position
(1) 3mm Dual Red/Green LED, when switch is in down thermal control position this will be red when below 81F and Green when the controller has activated the 3pin devices
*Controller draws 100ma
*Maximum power draw to not exceed 1800ma (1.8A) or it can damage the device
Picture may vary slightly due to style type
Check manufacturer specs for power requirements
Specially Manufactured for Coolerguys.com
***please read*** Additional information for fan selection and temp monitors
Available Accessories :
4pin to a 3pin power adapter, useful to power 4pin Molex devices from this controller
3pin extension cables (most fans/devices have 12" in length, needed if you are from the controller)
This is a demo of the Thermal controller powered by the above Adapter.
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.