Spire Coolgate 2012 #SP988B1-V3-PWM CPU Cooler
CoolGate 2012 is the next evolution of the hugely successful TherMax and Gemini CPU cooler Series. The increased number of heat-pipes combined with a higher number and density of dimpled fins and crowned with one high airflow, yet silent and PWM controlled fans for great cooling performance. Six (6) U-shaped 6mm heat-pipes are in Direct contact (HDT) with the CPU heat source. Swift heat transfer to the 46 aluminum dimpled fins providing a larger surface area for optimum heat dissipation. The CoolGate 2012 is supplied with one 12cm balanced, Nano-Tech bearing fans providing high airflow and adequate cooling. This fan is PWM controlled to provide the lowest noise v.s. cooling ratio possible. Compatibility is guaranteed with multi-platform mounting for all current Intel (incl. Socket 2011) and all popular AMD micro-processors. The CoolGate 2012 is pure cooling power that takes performance to the next level. Spire Powered by Innovation.
Six (6) 6mm all copper U-shaped sinter-powder heat-pipes
HDT Heat-pipe direct contact with all of the processor area
Straight lined heat-pipes allowing air to easily pass through
46 Stamped aluminum wide fins for best surface rate
Dimpled surface fin for increased heat transfer rate
All black-Nickel coated heatpipes to preserve killer looks from oxidation
One (1) 120mm Nano-Tech bearing fan design
Silent and superior MTBF Nano-tech bearing
Supports AM2/AM3 socket 775/1155/1156 & 1366/2011
Best cooling performance on hot cpu's up to TDP 150W
PWM fan speed RPM control,4 PIN PWM (2510) Mainboard Connector
The CoolGate 2012 Cooler is compatible with the latest ATX boards based on the Intel and AMD Micro-processors sockets 775/1155/1156/1366/2011 for Intel and AM2/AM3/940/939 for AMD (not G34 compatible).
Product Includes :
CoolGate 2012 heat-sink, One (1) BlueStar LED 120mm PWM controlled Fans, Two (2) Spring-Wire fan clips, BlueFrost thermal interface compound, Intel universal mounting set, AMD universal mounting set, Motherboard back-plate, User installation manual, Warranty registration card.
Socket 1156 / 1155 / 1366 / 775 / 2011
Heat sink : 140×47×160 mm (l × w × h)
12VDC Fan : 120×120×25 mm
Heatpipe Six (6) 6mm all copper U-shaped direct
Cooler :600~1800 RPM +/-10%
Only Fan : 600~1800 RPM +/-10%
Rated power 2.16 W
Rated Voltage 12 V
Noise level 10~22 dBA
Air flow 74.63 CFM Max.
Current 0.18 A
Connector 4 PIN PWM (2510)
Note:Width of case should be more than 190mm, otherwise, can not fit.
Intel Core i3 Intel Core i5 Intel Core i7 Cooler Intel LGA 1155 Intel LGA 1366 Intel LGA 2011 Intel LGA775 (Prescott) AMD Athlon XP (Thoroughbred) AMD Phenom II (AM2/AM3)
TDP 150 W
Thermal resistance 0.097 oC/W
Thermal paste BlueFrost - SP802 blue grease(Injection Tube,0.5g)
Static Pressure 2.86 mmH2O
Operating Temperature -10~70 oC
Storage Temperature -40~70 oC
Warranty by Manufacture 5 years
N.W 0.73 KG
clip 1 set / sp-802 grease / manual
120mm BlackStar 7 blade fan design High Quality Long MTBF Nano precision bearing Anti-Vibe universal rubber fan mountings (crews) Supports AM2/AM3 and 775/1155/1156 & 1366 &2011 All catena
* All Spire CPU cooling products come with thermal compound either pre-applied onto the cooler or in an injection tube. Compound will begin to function at its optimum potential, after a gradual increase in heat-dissipation, approximately 168 hours (7days) after initial application.
* All technical data shown above are measurements from our own laboratory. Product images shown may differ from actual product. Specifications are subject to change without prior notice.